Dock Bumpers, Laminated, Molded and Rubber, Replacement, Wheel Chocks

We offer Dock Bumpers in a range of sizes and styles including…

Standard Laminated Loading Dock Bumpers

The classic choice that is the perfect solution for most applications. Laminated dock bumpers absorb 80% of impact force to protect structures from damage. Dock bumpers are constructed of truck tire material making them ideal for docks, warehouses, loading bays and more. Our laminated dock bumpers are available in a variety of sizes to fit your specific needs. Great for facilities with heavy dock traffic. 

• Withstand years of punishment and provide the greatest protection even with consistent pounding and abuse.
• Ultimate protection from fabric reinforced rubber pads .
• Pads made from recycled bias-ply bus and truck tires.
• Woven on steel rods.
• Manufactured under pressure exceeding 1500 pounds.
• Shown to absorb over 80% of impact.
• Anchor bolts protected by at least 3″ of rubber to prevent damage
• Performs on any truck dock under any weather condition or prolong exposure.

Extra Length Loading Dock Bumpers

Designed for loading docks with dock seals, or where refrigeration, warmth, or extra length is needed. Loading dock bumper and the dock-seal interact to completely seal the truck to the dock.

Common Uses/Applications:

• Have unlimited applications in factories, warehouses and docks
• Vehicle impact protection for loading docks.
• Projecting above low docks.
• Rub rails at the sides of truck wells.
• Wall bumpers to protect against fork lift trucks.
• Special construction features to accommodate unusual anchoring conditions.

Features:

• Tough piles of truck tire material reduce chipping or abrasion, unlike molded rubber, extruded rubber, conveyor belting or wood plank bumpers.
• Attractive deep black color enhances a neat, professional architectural look.
• Manufactured under pressure exceeding 1,500 lbs. to absorb over 80% of impact force.
• Anchor bolts protected by at least 3″ of rubber to prevent damage.
• Maintenance free.

Material:

• 80% recycled material from fabric reinforced rubber pads cut from selected recycled truck tires.
• Rubber pads laminated between structural steel angles and secured with 3/4″ steel tie rods.

Installation:

• Structural mounting angles permit welded installations or provide bolting through steel.
• No assembly required.

Extra Thick Laminated Loading Dock Bumpers

Ideal for declined approaches where more “stand-out” distance from the loading dock is needed.

Uses/Applications:

• Ideal where greater standout distance from the dock is needed.
• Used with steep ramps, canopied docks, overhangs, or other architectural features.
• The special construction features to accommodate unusual anchoring conditions.

Features:

• Protects dock seals from over-compression.
• Tough piles of truck tire material reduce chipping or abrasion, unlike molded rubber, extruded rubber, conveyor belting or wood plank bumpers.
• Attractive deep black color enhances a neat, professional architectural look.
• Manufactured under pressure exceeding 1,500 lbs. to absorb over 80% of impact force.
• Anchor bolts protected by at least 3″ of rubber to prevent damage.
• Maintenance-free.

Material:

• 80% recycled material from fabric reinforced rubber pads cut from selected recycled truck tires.
• Rubber pads laminated between structural steel angles and secured with 3/4″ steel tie rods.
• Available in 9”, 10-1/2” and 12” projections.

Installation:

• Structural mounting angles permit welded installations or provide bolting through steel.
• No assembly required.

Steel Face Loading Dock Bumpers

The perfect option for docking areas where excessive friction occurs.

Uses/Applications:

• Ideal for use in docking areas where excessive friction from up and down trailer movement occurs.
• Can be used in any material-handling system are where heavy-duty protection is required.

Features:

• Available ability to deflect and absorb shock with standard laminated bumper beneath the steel-face.
• Comes in a wide variety of models and can be mounted in various heights, from flush mount to 12” above the dock, depending on the highest impact area.

Material:

• 80% recycled material from fabric reinforced rubber pads cut from selected recycled truck tires.
• Rubber pads laminated between structural steel angles and secured with 3/4″ steel tie rods.
• Standard pad thickness at 4-12” and 6” thick.
• Heights at 6”, 10” and 12”.
• The steel face is heavy 3/8” thick, heavy-duty, high carbon steel that is mounted to a standard laminated dock bumper.

Installation:

• Structural mounting angles permit welded installations or provide bolting through steel.
• No assembly required

Soft Loading Dock Bumpers

Specially designed “loop” pads provide the best impact absorption available.

Uses/Applications:

• Provides maximum protection with a unique “loop” design of bumper pads.
• Steel-face plate makes the Soft bumper ideal for use in docking areas where excessive friction from up-and-down trailer movement occurs.
• Can be used in any material-handling system area where heavy-duty protection is required.

Features:

• Unparalleled ability to deflect and absorb with loop design laminated bumper beneath a floating steel-face.
• Comes in a wide variety of models and can be mounted in various heights, from flush mount to 12” above dock, depending on highest impact area.

Material:

• 80% recycled material from fabric reinforced rubber pads cut from selected recycled truck tires.
• Rubber pads laminated between structural steel angles and secured with 3/4″ steel tie rods.
• Rubber pads 4” thick with loop pad and 3/8” steel-face for overall thickness of 5-1/2”.
• Steel face is heavy 3/8” thick, heavy duty, high carbon steel that is mounted to standard laminated dock bumper.

Installation:

• Structural mounting angles permit welded installations or provide bolting through steel.
• No assembly required.

Molded Loading Dock Bumpers

Molded rubber loading dock bumpers provide great protection for any light to medium traffic truck door – making a clean, safe, and attractive dock area. Our lineup of rubber dock bumpers are manufactured from fiber-reinforced prime rubber containing nylon and polyester. Molded into one piece for optimal strength, molded dock bumpers will not warp, rust, rot, or harden. All models have pre-drilled, countersunk mounting holes for easy installation, and are drilled to accept 3/4″ anchor bolts. These are the direct replacement bumpers for Edge-O-Dock Levelers (EOD) bumper blocks and most semi-truck trailers.